另一種DSP加速卡 可以選擇
Moderators: fred lui, Antress, stanley_c
另一種DSP加速卡 可以選擇
waves 出一種加速卡 可以給cubase及nuendo使用 可否在這裡介紹一下
你說的是這個吧~~
http://www.waves.com/content.asp?id=1622
但我認為waves的plug-in只要有快的cpu與大的ram就可以穩定的跑動.
除非他在發表新的plug-in是很屌的而且只支援這台硬體使用的才會
對他的銷售有幫助吧.
http://www.waves.com/content.asp?id=1622
但我認為waves的plug-in只要有快的cpu與大的ram就可以穩定的跑動.
除非他在發表新的plug-in是很屌的而且只支援這台硬體使用的才會
對他的銷售有幫助吧.
- Dragon_Huang
- MidiMall 金牌家族天王
- Posts: 8183
- Joined: Mon Jan 07, 2002 11:52 pm
- Location: Muzik Workshop
- Contact:
- 深白色 (Arys Chien)
- MidiMall 金牌家族天王
- Posts: 7215
- Joined: Thu May 23, 2002 3:24 am
- 深白色 (Arys Chien)
- MidiMall 金牌家族天王
- Posts: 7215
- Joined: Thu May 23, 2002 3:24 am
補充一下:
我剛剛到官網去看了。
1. 能跑的 plug-in 數有點少。如果想跑 IR-1 和 LinMB,各跑三個就沒了。會不會太少了一點?而且以這兩個 plug-in 在電腦本身對 CPU 的需求來看,Waves 這個 DSP 加速盒的運算能力其實大概也只有 P4-4.1G 而已,跟 UAD-1 or PowerCore 比起來都差了一截。
2. 沒看到價錢是多少耶。
3. 看它的連接方式是用 ethernet,跟 FX Teleport 一樣是用 LAN cable。那這樣的話,這個 DSP 加速盒會「獨佔」電腦的 ethernet port,造成該電腦無法再使用 FX Teleport 或寬頻上網嗎?還是可以串連?官網的照片沒有背面,數據列表也沒有包含硬體部分。
綜合以上來看,還不如買一台準系統 P4-3.8G + 1GRAM 拿來當 FX Teleport 的 slave,還可以多跑很多 Waves 之外的 plug-in 和 VSTi。
我剛剛到官網去看了。
1. 能跑的 plug-in 數有點少。如果想跑 IR-1 和 LinMB,各跑三個就沒了。會不會太少了一點?而且以這兩個 plug-in 在電腦本身對 CPU 的需求來看,Waves 這個 DSP 加速盒的運算能力其實大概也只有 P4-4.1G 而已,跟 UAD-1 or PowerCore 比起來都差了一截。
2. 沒看到價錢是多少耶。
3. 看它的連接方式是用 ethernet,跟 FX Teleport 一樣是用 LAN cable。那這樣的話,這個 DSP 加速盒會「獨佔」電腦的 ethernet port,造成該電腦無法再使用 FX Teleport 或寬頻上網嗎?還是可以串連?官網的照片沒有背面,數據列表也沒有包含硬體部分。
綜合以上來看,還不如買一台準系統 P4-3.8G + 1GRAM 拿來當 FX Teleport 的 slave,還可以多跑很多 Waves 之外的 plug-in 和 VSTi。
- Dragon_Huang
- MidiMall 金牌家族天王
- Posts: 8183
- Joined: Mon Jan 07, 2002 11:52 pm
- Location: Muzik Workshop
- Contact:
Netshell APA 32 - $1600 Retail. Netshell APA 44 - $2400 Retail.
乖乖組準系統吧. Waves保留住了傳統....賣的死貴.. !!!!
http://gearslutz.com/board/showthread.php3?t=33026
乖乖組準系統吧. Waves保留住了傳統....賣的死貴.. !!!!
http://gearslutz.com/board/showthread.php3?t=33026
喔真貴........
這裡有解釋為啥目前只有少部分PLUGIN 能用在WAVES 的APA
What plug-ins will run and how efficient is the APA?
At first release IR Convolution Reverb, L3, Lin EQ, Lin MB, C4, Renaissance Reverb, Renaissance Channel, SoundShifter, Morphoder, TransX, and Q-Clone.
Soon after the release there will be others. Not all Waves plug-ins need to support APA. There is a misconception in the Industry were if you use any plug-in on an external DSP it delivers efficiency to your system. This is wrong. Some plug-ins that are not DSP "HOGS" are better run on your host saving the CPU from delivering the process to and from the external DSP. Only CPU-hungry plug-ins benefit from external DSP.
As for efficiency - for example at 48k on a single APA 32 you will be able to run 6x IR Convolution Reverbs, 6x L3 's, 11x Lin EQ's, 7x Lin MB 's, 14x C4's, 11x Renaissance Reverbs each, or a combination of the above DSP power.
An APA44 you will run 20% more efficient then on an APA 32, on average.
這裡有解釋為啥目前只有少部分PLUGIN 能用在WAVES 的APA
What plug-ins will run and how efficient is the APA?
At first release IR Convolution Reverb, L3, Lin EQ, Lin MB, C4, Renaissance Reverb, Renaissance Channel, SoundShifter, Morphoder, TransX, and Q-Clone.
Soon after the release there will be others. Not all Waves plug-ins need to support APA. There is a misconception in the Industry were if you use any plug-in on an external DSP it delivers efficiency to your system. This is wrong. Some plug-ins that are not DSP "HOGS" are better run on your host saving the CPU from delivering the process to and from the external DSP. Only CPU-hungry plug-ins benefit from external DSP.
As for efficiency - for example at 48k on a single APA 32 you will be able to run 6x IR Convolution Reverbs, 6x L3 's, 11x Lin EQ's, 7x Lin MB 's, 14x C4's, 11x Renaissance Reverbs each, or a combination of the above DSP power.
An APA44 you will run 20% more efficient then on an APA 32, on average.
- Dragon_Huang
- MidiMall 金牌家族天王
- Posts: 8183
- Joined: Mon Jan 07, 2002 11:52 pm
- Location: Muzik Workshop
- Contact: